FlashFloppy - Gotek Firmware

[cemkaan]

FlashFloppy v3.30 (Stable)

MG.CFG: New option step= allows to specify double-step operation
FF.CFG: New option max-cyl= allows limiting head-step range
SFRKC30 Gotek Models: Improved rotary support on new "KC30" header


https://github.com/keirf/flashfloppy/releases/download/v3.30/flashfloppy-v3.30.zip

Firmware Programming
https://github.com/keirf/FlashFloppy/wiki/Firmware-Programming

Firmware Update
https://github.com/keirf/FlashFloppy/wiki/Firmware-Update

Hardware Mods
https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods

Gotek Compatibility
https://github.com/keirf/FlashFloppy/wiki/Gotek-Compatibility

**** Ben sadece yeni çıkan versiyonların duyurusunu yapıyorum.
Cihazınızda oluşabilecek hasar ya da arızlar konusunda sorumluluk kabul etmiyorum.

Firmware yüklemesi ya da güncellemesi sonrası yaşayacağınız sorunlar için, FlashFloppy firmware programcısı ile iletişime geçmelisiniz.

https://github.com/keirf

[cemkaan]

FlashFloppy 3.32 (Stable)

Fix 'oled-font=8x16' option (broken in release 3.31)
Improve drive-select ISR performance
Fixes issues with fast Amiga accelerators

https://github.com/keirf/flashfloppy/releases/download/v3.32/flashfloppy-3.32.zip


Firmware Programming
https://github.com/keirf/FlashFloppy/wiki/Firmware-Programming

Firmware Update
https://github.com/keirf/FlashFloppy/wiki/Firmware-Update

Hardware Mods
https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods

Gotek Compatibility
https://github.com/keirf/FlashFloppy/wiki/Gotek-Compatibility

[cemkaan]

FlashFloppy Release 3.33 (Stable)


Support new board SFRKC30.AT4.35
Support new chip AT32F435 (288MHz M4, 256kB+ Flash, 384kB SRAM)
New UPD file format and explanatory README: Please read!

https://github.com/keirf/flashfloppy/releases/download/v3.33/flashfloppy-3.33.zip

[cemkaan]

FlashFloppy 3.34 (Stable)

AT32F435: Fix startup to MCU spec (LDO voltage, Flash clock divisor)
AT32F435: Cache HFE and QD image data, since there is plenty of RAM
Allow rotary encoder on pins PA13/PA14 on any board except QFN32 MCU
io-test: Fix io-test alt firmware for modern Gotek boards


https://github.com/keirf/flashfloppy/releases/download/v3.34/flashfloppy-3.34.zip

[cemkaan]

3.36 (Stable)

AT32F435: Fix SD card handling on boards which support it
FF.CFG, OSD: New options osd-columns= and osd-display-order=
Amiga: Improved pin 34 ID/RDY emulation
Requires AT32F435 MCU and MOR jumper strap
Requires FF.CFG options: interface=amiga, motor-delay=500

https://github.com/keirf/flashfloppy/releases/download/v3.36/flashfloppy-3.36.zip

[cemkaan]

3.37 (Stable)

Amiga: Fix firmware crash when mounting read-only disk image
Since v3.36 when interface=amiga and motor-delay= is configured
Amiga: Respect MOTOR when motor-delay= is configured and disk ejected
Previously the MOTOR signal was ignored when no disk inserted

https://github.com/keirf/flashfloppy/releases/download/v3.37/flashfloppy-3.37.zip

[cemkaan]

3.38 (Stable)

AT32F435: Fix RDATA release on drive deassert
SF7: Support Sega SF-7000 *.SF7 images

https://github.com/keirf/flashfloppy/releases/download/v3.38/flashfloppy-3.38.zip

[cemkaan]

FlashFloppy Release 3.40

https://github.com/keirf/FlashFloppy/wiki/Downloads

XDF: Fix writes to side 1 of XDF disk images
HFE: Better handling of long No Flux Areas
QuickDisk: Reduce motor spinup time to 1 second
LCD: Completely blank display when backlight is off

[cemkaan]

FlashFloppy Release 3.41 (Stable)

Bugfix release for AT32F415-based Goteks
AT32F415: Fix timer handling since clock speed increase (v3.39).
LCD: Faster power-on initialisation. Don't wait for display to clear.

https://github.com/keirf/flashfloppy/releases/download/v3.41/flashfloppy-3.41.zip